RevX X-FLOW Cold Plunge Filtration System
The RevX X-FLOW Cold Plunge Filtration System is a professional-grade, pre-assembled water management system designed specifically for cold plunge and ice bath tubs. It combines a 200W high-flow pump with integrated heat sink, an 18W UV-C sterilizer, and a 20-micron pleated cartridge filter to provide continuous 24/7 water circulation, UV sanitation, and fine filtration — keeping your cold plunge water consistently clean and clear with minimal maintenance. Connects via universal 1-inch barb fittings and arrives pre-assembled for plug-and-play setup.
Why Customers Choose the RevX X-FLOW
- 200W high-flow pump with integrated heat sink — approximately 2,720+ GPH actual throughput
- 18W UV-C sterilizer helps neutralize bacteria, pathogens, and algae without chemical additives
- 20-micron pleated 10-inch cartridge filter captures fine debris, sediment, hair, and skin cells
- Integrated heat sink helps prevent pump heat from warming cold plunge water
- Designed for continuous 24/7 low-maintenance operation
- IPX4-rated components for indoor and outdoor use
- Pre-assembled plug-and-play setup with universal 1-inch barb connectors
- Compatible with RevX water chillers (stacking plumbing kit available separately)
- Designed for residential and high-use commercial cold plunge installations
Product Highlights
200W High-Flow Pump with Integrated Heat Sink
The 200W pump delivers approximately 2,720+ GPH of actual water throughput, providing rapid and continuous water turnover to keep your cold plunge water well-circulated. The integrated heat sink is designed to minimize heat transfer from the pump motor into the cold water, helping your chiller maintain target temperatures more efficiently.
18W UV-C Sterilizer
The 18W UV-C sterilizer exposes water to high-intensity ultraviolet light as it passes through the system, targeting bacteria, pathogens, and algae at the DNA level to help maintain biologically clean water. UV sanitation reduces reliance on chemical sanitizers for routine water maintenance.
20-Micron Pleated Cartridge Filter (10-Inch)
The 20-micron pleated cartridge filter captures fine debris, hair, skin cells, and sediment to help maintain clear water. RevX recommends replacing the filter cartridge every 2–4 weeks depending on usage frequency.
Pre-Assembled Plug-and-Play Design
The X-FLOW arrives pre-assembled and ready to connect to your cold plunge tub via universal 1-inch barb fittings. No complex plumbing or assembly is required to get started.
IPX4-Rated Components
All components are IPX4-rated for splash resistance, making the X-FLOW suitable for both indoor and outdoor cold plunge installations.
Chiller Stacking Plumbing Kit Compatible
A dedicated plumbing kit is available that allows the X-FLOW filtration system to be stacked directly on top of compatible RevX water chillers, creating a compact, integrated cold plunge setup. The stacking plumbing kit is sold separately.
Designed for 24/7 Low-Maintenance Operation
The X-FLOW is engineered for continuous operation in residential and high-use commercial cold plunge environments, minimizing the frequency of manual cleaning and full water changes.
Specifications
| System Type | UV-C + sediment filtration and water circulation |
| Designed For | Cold plunge, ice bath, and cold water therapy tubs |
| Water Pump | 200W with integrated heat sink (high efficiency) |
| Flow Rate | Approximately 2,720+ GPH actual throughput |
| UV-C Sterilizer | 18 Watt |
| Filter Type | 20-micron pleated cartridge, 10-inch |
| Recommended Filter Change | Every 2–4 weeks depending on usage |
| Plumbing Connections | Universal 1-inch barb connectors (inlet and outlet) |
| IP Rating | IPX4 (splash resistant) |
| Assembly | Pre-assembled — plug and play |
| Chiller Compatible | Yes — stacking plumbing kit available separately |
| Use Environment | Indoor and outdoor |
| Shipped Weight | 65 lbs |
| Warranty | Please refer to RevX warranty documentation |
| SKU | RXW-0536 |
| Condition | New |
Ideal For
- Cold plunge tub owners wanting continuous 24/7 water filtration and UV sanitation
- Those who want to reduce reliance on chemical sanitizers for routine water maintenance
- High-use residential cold plunge setups requiring reliable, low-maintenance filtration
- Commercial cold plunge installations requiring consistent water quality
- Those pairing a RevX filtration system with a compatible RevX water chiller
- Indoor and outdoor cold plunge installations
Important Information
- The X-FLOW system requires standard power outlets for the pump and UV-C sterilizer. Ensure your installation area has adequate power access.
- This system is designed for cold water use. Do not use with water temperatures outside the operating range specified in the product documentation.
- Replace the 20-micron pleated cartridge filter every 2–4 weeks depending on usage frequency to maintain water quality and system performance.
- The UV-C sterilizer lamp has a finite service life. Inspect and replace the UV lamp according to the manufacturer’s recommended schedule.
- Do not look directly at the UV-C lamp during operation. UV-C light can cause eye and skin injury.
- Follow all installation instructions included with the product. Ensure all 1-inch barb hose connections are secure before operating.
- For outdoor installations, ensure the unit is positioned to avoid direct water ingress from rain or irrigation beyond its IPX4 splash resistance rating.
- The stacking plumbing kit for use with RevX chillers is sold separately.
- This product is an accessory for cold plunge tubs and is not a medical device.
Frequently Asked Questions
What does the RevX X-FLOW include?
The RevX X-FLOW includes a 200W high-flow pump with integrated heat sink, an 18W UV-C sterilizer, a 20-micron pleated 10-inch cartridge filter, and all pre-assembled plumbing components with universal 1-inch barb connectors. It arrives ready to connect to your cold plunge tub.
Does this system require any assembly or plumbing?
No. The RevX X-FLOW arrives pre-assembled. Simply connect the 1-inch barb inlet and outlet fittings to your cold plunge tub’s plumbing and plug in the system to get started.
How often do I need to change the filter?
RevX recommends replacing the 20-micron pleated cartridge filter every 2–4 weeks depending on how frequently the cold plunge is used. Regular filter changes help maintain water clarity and system performance.
Can the X-FLOW run continuously?
Yes. The RevX X-FLOW is designed for continuous 24/7 low-maintenance operation, making it suitable for both residential and high-use commercial cold plunge installations.
Is the X-FLOW compatible with RevX water chillers?
Yes. The X-FLOW is compatible with RevX water chillers. A dedicated stacking plumbing kit is available separately that allows the X-FLOW to be mounted directly on top of compatible RevX chillers for a compact, integrated setup.
Can this system be used outdoors?
Yes. The X-FLOW features IPX4-rated components, making it suitable for both indoor and outdoor cold plunge installations. Position the unit to avoid direct water ingress beyond its splash resistance rating.
Does the UV-C sterilizer eliminate the need for chemicals?
The 18W UV-C sterilizer is designed to help neutralize bacteria, pathogens, and algae in the water as it passes through the system, which can reduce reliance on chemical sanitizers for routine maintenance. However, water quality management practices may vary depending on usage, water source, and local conditions.
What is the difference between the X-FLOW and the RevX Ozone Water Filtration System?
The X-FLOW uses a UV-C sterilizer for water sanitation, while the RevX Ozone Water Filtration System uses an Ambohr ozone generator. The X-FLOW features a higher-flow 200W pump (approximately 2,720+ GPH) compared to the Ozone System’s 1,700 GPH pump. Both systems include a 20-micron filter and are pre-assembled for plug-and-play use. The right choice depends on your preferred sanitation method and flow rate requirements.
The RevX X-FLOW is a well-engineered, pre-assembled filtration and UV sanitation system that provides continuous, low-maintenance water management for cold plunge tubs. If you want reliable 24/7 water circulation, UV sterilization, and fine filtration in a plug-and-play format, it’s a practical and high-quality addition to any cold plunge setup.
